El Fero

Decorative Line

Decorative finishing effect usable indoor and outdoor Description EL FERO is a decorative product water dilutable composed from a fund, EL FERO and an oxidant and antiquing finishing, EL FERO ATTIVATORE. Applying EL FERO ATTIVATORE on EL FERO, id possible made the natural effect of the rust, as it would be appeared an iron surface under the atmospheric agent.

KG 1.000
KG 5.000
KG 10.000

El Fero

Decorative Line

Description

Uses With the appropriate precautions, is possible use EL FERO on:

Old synthetic or mineral paint Old plasters in lime or plaster Civil plasters New plaster with civil finishing Plasterboard surfaces It is not advisable to apply this type of finish over fresh mineral surfaces, as it may compromise the process of oxidation of the liquid activator. No apply in presence of humidity.

Characteristics

Technical features EL FERO EL FERO ATTIVATORE Product aspect paste liquid Dilution 5%-10% with water ready to use Application roller or brush sponge roller, brush, sponge or spray Yields 4-9 m2/kg 8/14 m2/lt (Yields can changes depending on the support and the final effect you want to obtain)

Other

Base preparation Clean the surface form powder or other impurity. If the surface present mold, pre-treat with a suitable liquid algaecide, called DETERGENTE ANTIMUFFA, eliminate any paintings in phase of detachment. When the surface is completely clean, apply the primer FONDO RUVIDO, to make the surface uniform without differences in absorption.

Product application When the surface will be completely dry, proceed with the application of EL FERO and then, when the material will be perfectly dry apply a coat of EL FERO ATTIVATORE, and a second hand in the necessary quantity to obtain the effect desired, more activator is applied, more intense will be the effect of oxidation.

Protection for the outside surfaces FINITURA FLOOR, MATT or GLOSS

Colors Not Colorable

Packing EL FERO: 1 kg, 5 kg, 15 kg EL FERO ATTIVATORE: 1 lt

Warnings It is advisable to complete each work with materials from the same batch production the material can be applied and stored at temperatures between +5 ?C and +35 ?C. If stored in the original container has a term of one year. At the end of the application properly clean the tools with water.


The reported data refer to laboratory tests: during practical applications in building sites these can be slightly modified according to the conditions of any installation. The person who works with the product must verify the expected suitability of use of the product, taking upon himself.

The company Colorificio Veneziano s.r.l. may carry out technical alterations on products without notice.

Download PDF Samplings ...