Zetacryl 72Q is an acrylic hydro-painting at high coverage and very resistant; usually it is used for both internal and external spaces for the decoration of facades, ledges and ceilings.
Its composition consists on a high percentage of acrylic resins, covering pigments which are very resistant to molds and light.
The surface needs to be dry and clean, without dust, dirt, oil or any other greasy spots and must be completely clean. Before the varnishing cycle, wait at least 28 days from the application of the finishing plaster surface. In case of chalked or particularly absorbent plasters we suggest to apply the water acrylic insulating blend like Isoedil-A (or Murisol K) diluted in a ratio of 1:5 with water or apply Isolante Alta Penetrazione to be diluted 1:5.
We always suggest to use this treatment also when the surface you want to paint presents tough absorbance diversities.
Satin-finished hydro painting
Dilute the product with water; dilute the first layer at 35%, the second at 20%.
Brush or roll
Drying and Preservation
The drying process varies depending on the weather conditions. Avoid the preservation in very cold places. If stocked in proper places and inside the original package lasts 1 year.
The result depends on the supports, over two-coat plasters 4/5 m2
White or the colors from the palette.
Lt 14 and 5 litres.
The reported data refer to laboratory tests: during practical applications in building sites these can be slightly modified according to the conditions of any installation.
The person who works with the product must verify the expected suitability of use of the product, taking upon himself.
The company Colorificio Veneziano s.r.l. may carry out technical alterations on products without notice.