Base preparation
The surface needs to be dry and clean, without dust, dirt, oil or any other greasy spots and must be completely clean. Before the varnishing cycle, wait at least 28 days from the application of the finishing plaster surface. In case of chalked or particularly absorbent plasters we suggest to apply the water acrylic insulating blend like Isoedil-A (or Murisol K) diluted in a ratio of 1:5 with water or apply Isolante Alta Penetrazione to be diluted 1:5.
We always suggest to use this treatment also when the surface you want to paint presents tough absorbance diversities.
Aspect
Satin-finished hydro painting
Dilution
Dilute the product with water; dilute the first layer at 35%, the second at 20%.
Application
Brush or roll
Drying and Preservation
The drying process varies depending on the weather conditions. Avoid the preservation in very cold places. If stocked in proper places and inside the original package lasts 1 year.
Result
The result depends on the supports, over two-coat plasters 4/5 m2
Dry Waste
69% +/-
Specific weight
1.454 kg/lt
Supply colors
White or the colors from the palette.
Packaging
Lt 14 and 5 litres.
The reported data refer to laboratory tests: during practical applications in building sites these can be slightly modified according to the conditions of any installation.
The person who works with the product must verify the expected suitability of use of the product, taking upon himself.
The company Colorificio Veneziano s.r.l. may carry out technical alterations on products without notice.
2008 Edition.
