fbpx

Colorificio Veneziano

the Art of Paint

Filler Lavabile

Washable Hydro Painting

Washable painting at high coverage for internal space.

 

Composition

Washable hydro painting for internal spaces at high percentages of water-soluble and plastic copolymer resins, selected inerts, specific additives like dispersing and air-entraining agents to improve the application, covering pigments highly resistant to light, anti-molds, plastfiers that make Filler Lavabile the right and proper product for smooth surfaces like cement walls. The colorings used grant a chromaticity stable throughout time.

 

Description

Washable acrylic hydro painting at high coverage and resistance.

 

Features

  • Specific weight: about 1.468 kg/lt
  • Use: 150-200 g/m2 per layer (0.10-0.13 l/m2)
  • Result: 4-6 m2/l when the two-hand work is over (depending on the support)

A water repellant product, resistant to alkali; good to be applied on any plaster or surfaces that have already been treated always before one layer of Isoedil-A.

 

Technical Data

Wash resistant for 3000 cycles according to DIN 53778 (LAVABILE).
Color preservation for 600 hours of UV-condensation according to ISO 7724.
Resistant to chalking for 600 hours of UV-condensation according to ASTM-D 659.
Water vapour diffusion (DIN 53122): 55 g/m2 in 24 h.
Resistance factor to vapour emission (DIN 52615): µ = 2550
Air equivalent layer (DIN18550): Sd = µ•s = 0.5 m ca. (calculated with s = 0.2 • 10-3 m).
Coefficient of water absorbtion (DIN 52617): w = 0,08 kg/(m2 • h1/2) — Sd • w =0,04 kg/(m • h1/2)
Respects the theory by Kuenzle (DIN 18550).

 

Base preparation

The surface needs to be dry and clean, without dust, dirt, oil or any other greasy spots and must be completely clean. Before the varnishing cycle, wait at least 28 days from the application of the finishing plaster. In case of chalked or particularly absorbent plasters we suggest to apply the insulating blend like Isoedil-A slightly diluted in a ratio of 1:5 with water or apply Isolante Alta Penetrazione to be diluted 1:5.
We always suggest to use this treatment also when the surface you want to paint presents strong absorbance diversities.

 

Application

Dilution in weight with water: the first layer until 40%, the second until 20% if with brush. Apply the second layer after 4 hours minimum from the first. The application can be done with a brush, with a wool roll.

 

Warnings

  • Apply the material only over seasoned and dried plasters.
  • Avoid the application during the coldest months of the year.
  • Apply at a temperature higher than +5 °C and lower than +35 °C.

 

Supply

  • 14 and 5 liters cans.
  • Colors: white available. Under request warm pastel colors (see the colors folder).

 

Preservation

Avoid the preservation in very cold places. Preserve at temperatures higher than +5 °C and lower than +30 °C. If stocked in proper places lasts 1 year.

 

Quality

Filler Lavabile is constantly and properly checked in our laboratories. The raw materials used are strictly selected and checked.

 


The reported data refer to laboratory tests: during practical applications in building sites these can be slightly modified according to the conditions of any installation.
The person who works with the product must verify the expected suitability of use of the product, taking upon himself.
The company Colorificio Veneziano s.r.l. may carry out technical alterations on products without notice.
 
April 2008 Edition.


Italiano, Italia English, UK русский, RU украинский, UA AZ