Superficial anti-salt treatment for stone, brick or mixed walls. It eliminates and avoids the sprouting of saline efflorescence on surfaces between the wall and the dehumidifying macro porous plaster.
Mocropor-S composition has been studied for the preparation of surfaces to plaster with the renovation plaster macropor. Its dehumidifying capacity protects the mortar for a long time against the action of salts. The effect of these 2 elements allows to obtain an excellent lasting wall renovation from humidity.
Tanks 1,5,10,20 liters
It lasts 3 months inside its original tank stocked and protected from UV.
- Aspect: uncolored liquid
- Use: anti-salt treatment before plaster for indoor/outdoor use
- Foundations: stone or brick walls
- Realization: mixture ready to use
- Application ways: manually with brush or air spray painting
- Laying conditions: from +5 °C to +35 °C
- Consumption: 0.25-0.5 lt/m2
Mocropor-S has a very low viscosity so the product penetrates deeply in the support and stops any efflorescence inside the wall avoiding the superficial crystallization. The effect comes from a change in the treated support porosity that avoids water to enter without modifying the osmotic capacity of the material. The absence of solvents allows to use the product also in scarcely ventilated indoor spaces. The treatment with Mocropor-S allows a direct application of cement products or paintings, both on dry and humid surfaces, without having any adherence problem.
Mocropor-S must be applied after cleaning the wall from encrusted salts, dust and any detaching friable part. When the work in over wash the cleaned supports.
Leave the wall dry properly and then apply Mocropor-S with a brush or by air spray painting, paying attention to let the product penetrate on the whole surface. Apply the dehumidifying plaster within 1 hour from the treatment.
Protect the product from atmospheric agents after the lay-up. Do not add any solvent or water. Avoid to use the product if its color is milky.
We apply to our product the dispositions foreseen from the directive 1999/45/CE (articles 10 and 14 of the attachment V).
The reported data refer to laboratory tests: during practical applications in building sites these can be slightly modified according to the conditions of any installation.
The person who works with the product must verify the expected suitability of use of the product, taking upon himself.
The company Colorificio Veneziano s.r.l. may carry out technical alterations on products without notice.
May 2009 Edition.