Adhesion paint for chalk, lime/chalk and concrete plasters.
Composition
Fondo Siloxan T3 Fibrato is used to improve adherence on chalk plasters, lime/chalk plasters and concrete supports. Thanks to its fibers keeps also a better elasticity and mechanical resistance.
Technical Data
- Specific weight: 1.500 kg/lt
- Granulometry: lower than 0.50 mm
- Result: 0.200 kg/m2
Base Preparation
The wall always needs to be dry, clean and without any dust or grease spot.
Processing
Dilute Fondo Siloxan T3 Fibrato with 30% water and apply with roll or brush.
The following application must be made after the drying-up.
Warnings
- Apply Fondo Siloxan T3 Fibrato on dry plasters with humidity not higher than 25%.
- Apply Fondo Siloxan T3 Fibrato with a temperature higher than +5 °C.
Supply
- Cans: 14 and 5 litres.
Preservation
Preserve the product in right places. If stocked inside the original can it lasts 1year.
Quality
Fondo Siloxan T3 Fibrato is constantly and properly checked. The raw materials used are strictly selected and checked.
The reported data refer to laboratory tests: during practical applications in building sites these can be slightly modified according to the conditions of any installation.
The person who works with the product must verify the expected suitability of use of the product, taking upon himself.
The company Colorificio Veneziano s.r.l. may carry out technical alterations on products without notice.
May 2008 Edition.
