Transparent liquid for indoor or outdoor use to apply on walls that present mold algae and microorganisms. It disinfects the whole wall, removes molds and makes the surface suitable for following painting applications. This cycle is fundamental when the wall starts showing the sprouting of molds or algae.
Disinfectant Liquid with fungicides, formed of water and anti-mold product.
- Physical status: transparent liquid
- Specific weight: 1 kg/l
- Drying time: 1 hour
- Recoating time: minimum 5 hours
- Result: depending on the base absorption (5 m2/l approximately)
Use ita s base to renovate walls that have been affected by molds and microorganisms. It can also be used as diluting product for hydro paintings since it increases the resistance to molds.
Use a brush being careful to protect eyes with glasses, wear a mask and gloves even if the product is not harmful. Ventilate the environment well.
We suggest to apply the product with a temperature between +5 °C and +35 °C.
The reported data refer to laboratory tests: during practical applications in building sites these can be slightly modified according to the conditions of any installation.
The person who works with the product must verify the expected suitability of use of the product, taking upon himself.
The company Colorificio Veneziano s.r.l. may carry out technical alterations on products without notice.
April 2008 Edition.