fbpx

Colorificio Veneziano

the Art of Paint

Intonaco Acrilico Antialga

Acrylic Surface Coatings

Algae inhibitor abd rustic acrylic coating.

 

Composition

Intonaco Acrilico Antialga is a finishing coating formed of special acrylic binders highly water repellant, very fine colored quartz sands resistant to light and quemical additives to improve the manufacturing and adherence.
The row materials used allow a good transpiration of the wall. The addition of anti-algue and anti-molds additives allow am excellent resistance to atmospheric agents and bacteria.

 

Features

  • Specific weight: 1.850 kg/l
  • Dilution: ready to use
  • Available in the following granulometries: 0.6; 1; 1.2; 1.5 and 2.0 mm

 

Consumption

  • Granulometry: 0.6 mm
    • 2.5 – 2.7 kg/m2 (2 layers) over thin plaster, glues like T POLVERE and T PASTA
    • 3.0 – 3.2 kg/m2 (2 layers) over thick base plasters
  • Granulometry: 1.0 mm
    • 1.5 – 1.7 kg/m2 over glues like T POLVERE and T PASTA
    • 1.8 – 2.0 kg/m2 over base plasters
  • Granulometry: 1.2 mm
    • 2.0 – 2.2 kg/m2 over glues like T POLVERE and T PASTA
    • 2.3 – 2.5 kg/m2 over thick base plasters
  • Granulometry: 1.5 mm
    • 2.3 – 2.5 kg/m2 over glues like T POLVERE and T PASTA
    • 2.5 – 2.7 kg/m2 over thick base plasters
  • Granulometry: 2.0 mm
    • 2.8 – 3.0 kg/m2
    • 3.0 – 3.2 kg/m2

With such a granulometry the denomination of the product is Graffiato. It allows to obtain a finishing surface with rustic effect.

 

Technical Data

SPEED TRANSMISSION OF STEAM EN ISO 7783-2

Category Spread equivalent to the thickness of the air layer Sd/m
V2 Medium Value between ≥0,14 <1,4
                WATER ABSORPTION EN 1062-3
Category Spread equivalent to the thickness of the air layer Sd/m
W3 Low Value ≤0,1 kg/m²hˆ0,5
                GRIP EN 1542 (test carried out in a time of 28 days mandatory technical)
All measured values must be at least 0.3 MPa (mean value recorded 1.58 Mpa)
                DURABILITY EN 13687-3
All measured values must be at least 0.3 MPa (mean value recorded 2.34 Mpa)

N.B. Tests done by: Laboratory aut. by the Ministry of Infrastructure and Transport P.C.S. LL.PP.S.T.C. -law November 5 1971 n. 1086 Dec. N ° 56300 of 14/03/2007 Laboratory aut. by the Ministry of Infrastructure and Transport P.C.S. LL.PP.S.T.C. – Presidential Decree No. 380/01 art. 59 circ. n ° 349/99 weeks. a), b) and c) Dec. n ° 53362 of 06/05/2005 Notified Body n ° 1308 (DM 826 149 of 22/03/2004 of the Ministry of Industry) under Dir. 89/106 / EEC, DPR No. 246/1993, DM 156/2003

Use

Intonaco Acrilico Antialga is used as protective and decorative coating for external and internal spaces over lime – cement bases.

 

Base preparation

The finishing coating must be applied after at least 28 days from the bottom plaster application.
The surface needs to be completely clean. Grease, oil and wax spots must be removed.
Chalked or absorbing bases must be treated with an insulating base, our Isoedil-A slightly diluted a ratio of 1:5 with water.
We suggest to dilute Isoedil-A with Lavedil SQ when the surface to be coated presents absorbance diversities. (doors and windows frames, etc.) or if you want to extend the working time.
To apply Intonaco Acrilico Antialga the base plaster must be well finished.
In case of applying the coating over surfaces that are very smooth, not spongy and scarcely absorbant we suggest to apply a layer of Fondo Ruvido slightly diluted in 50% weight with water, instead of using the base Isoedil-A,

 

Application

Lay the material on the surface with a spatula paying attention at distributing one even layer of material. Use a plastic spatula to make the finishing with circular movements.
To apply the product with 0.6 mm thin granulometry you need 2 layers of material. The second layer must be applied when the first one results to be completely dry.

 

Warnings

  • For every work, collect the needed material all of the same kind.
  • Apply only over seasoned and dry plasters.
  • Avoid the application on facades with full sun and too much wind.
  • Avoid the application during the coldest and most humid months of the year; +5 °C is the lowest temperature for the laying-up and application of the material.
  • After applying, the surfaces must be protected from rain for at least 48 hours.
  • Avoid the application of the material over a facade in different times.

Intonaco Acrilico Antialga must be used at the original status without adding other materials.

 

Supply

  • 25 Kg cans.
  • Colors: see the colors palette.

 

Preservation

Avoid the preservation in very cold places. Preserve at temperatures higher than +5 °C and lower than +30 °C. If stocked in proper places lasts 1 year.

 

Quality

Intonaco Acrilico Antialga is constantly and properly checked in our laboratories. The raw materials used are strictly selected and checked.

 


The reported data refer to laboratory tests: during practical applications in building sites these can be slightly modified according to the conditions of any installation.
The person who works with the product must verify the expected suitability of use of the product, taking upon himself.
The company Colorificio Veneziano s.r.l. may carry out technical alterations on products without notice.

July 2008 Edition.


Italiano, Italia English, UK русский, RU украинский, UA AZ