PDFFeaturesnSpecific weight: 1.610 kg/lnUse: 250-300 g/m2 (0.10-0.13 l/m2) per layer on bottom.nResult: 3-4 m2/l when the two-hand work is over.n nnTechnical DatanResistent to wash for 2000 cycles.nColor preservation and Resistance to chalking for 600 hours of UV-condensation.nWater vapor diffusion 280 g/m2 in 24 hours.nResistance factor to vapor emission: ? = 350nAir equivalent layer: Sd = 0.08 m (calculated with s = 0.2 ? 10-3 m).nCoefficient of water absorption: w = 0.003 kg/(m ? h1/2) ca. ? Sd ? w < 0.0024 kg/(m ? h1/2)nRespects the theory of Kuenzle.
Siloxan Q
Siloxan Q
It is a finishing coating formed of special water-based acryl-siloxanic binders that bestow at the same time water-repellence, breathability and resistance to external agents at the highest levels.
Lectus hac tortor congue habitasse consectetur. Nibh id sapien libero mollis vehicula nostra accumsan potenti cras imperdiet.
UsenSILOXAN Q is used as first quality protective and decorative coating having a mineral aspect, white or colored, on finishing plasters for indoor and outdoor use, especially when a long term preservation is required.nn nnBase preparationnThe surface needs to be dry and clean, without dust, dirt, oil or any other greasy spots and must be completely clean. In case of chalked or particularly absorbent plasters we suggest to apply the base SILOXAN Q with water.nWe always suggest to use this treatment when the surface you want to paint presents tough absorbance diversities.nn nnApplicationnDilution in weight with water: the first layer until 40%, the second until 20%. Apply the second layer after 8 hours minimum from the first. The application can be done with a brush or with a wool roll.nn nnWarningsnApply with a temperature higher than +5 ?C and lower than +35 ?C.nApply the material only over seasoned and dried plasters.nAvoid the application during the coldest months of the year.n nnSupplyn14 liters can.nTints: see the colors folder.n nnPreservationnPreserve the product in right places. If stocked inside the original can it lasts 1year.nn nnQualitynSILOXAN Q is constantly and properly checked in our laboratories. The raw materials used are strictly selected and checked.UsenSILOXAN Q is used as first quality protective and decorative coating having a mineral aspect, white or colored, on finishing plasters for indoor and outdoor use, especially when a long term preservation is required.nn nnBase preparationnThe surface needs to be dry and clean, without dust, dirt, oil or any other greasy spots and must be completely clean. In case of chalked or particularly absorbent plasters we suggest to apply the base SILOXAN Q with water.nWe always suggest to use this treatment when the surface you want to paint presents tough absorbance diversities.nn nnApplicationnDilution in weight with water: the first layer until 40%, the second until 20%. Apply the second layer after 8 hours minimum from the first. The application can be done with a brush or with a wool roll.nn nnWarningsnApply with a temperature higher than +5 ?C and lower than +35 ?C.nApply the material only over seasoned and dried plasters.nAvoid the application during the coldest months of the year.n nnSupplyn14 liters can.nTints: see the colors folder.n nnPreservationnPreserve the product in right places. If stocked inside the original can it lasts 1year.nn nnQualitynSILOXAN Q is constantly and properly checked in our laboratories. The raw materials used are strictly selected and checked.
Prodotto Correlato
