Wall hydro painting at high coverage for internal spaces.
Lectus hac tortor congue habitasse consectetur. Nibh id sapien libero mollis vehicula nostra accumsan potenti cras imperdiet.
PRINT is a hydro painting formed of special emulsions, very covering charges and anti-mold additives. PRINT is used for internal spaces and it has got an excellent coverage with the objective of preventing the formation of molds on walls. It offers great transpirability and it is very effective throughout time only if not covered with other paintings.
Specific weight: 1.625 kg/lnUse: 130-170 g/m2 per layernResult: 5-6 m2/l when the two-hand work is overnDull finishing for inside spaces, good for any kind of wall support finished with smooth finishing plaster, thin mortar or already treated walls. It gives homogeneity and a nice aesthetic aspect to the walls.
UsenPRINT is used as decoration and protection of finishing plasters for internal spaces and walls that have been previously painted.nn nnBase preparationnThe surface needs to be dry and clean, without dust, dirt, oil or any other greasy spots and must be completely clean. Before the varnishing cycle, wait at least 28 days from the application of the finishing plaster. In case of chalked or particularly absorbent plasters we suggest to apply the insulating blend like ISOEDIL-A slightly diluted in a ratio of 1:5 with water or apply ISOLANTE ALTA PENETRAZIONE.nWe always suggest to use this treatment when the surface you want to paint presents tough absorbance diversities.nn nnApplicationnDilution in weight with water: the first until 40%, the second 20%. Apply the second layer after 4 hours minimum from the first. The application can be done with a brush, with a wool roll and by airless spray-painting.nn nnWarningsnApply the material only over seasoned and dried plasters.nAvoid the application during the coldest months of the year.nApply at a temperature higher than +5 ?C and lower than +35 ?C.n nnSupplyn14 and 5 liters cans.nColors: white available. Under request warm pastel colors (see the colors folder).n nnPreservationnAvoid the preservation in very cold places. Preserve at temperatures higher than +5 ?C and lower than +30 ?C. If stocked in proper places lasts 1 year.UsenPRINT is used as decoration and protection of finishing plasters for internal spaces and walls that have been previously painted.nn nnBase preparationnThe surface needs to be dry and clean, without dust, dirt, oil or any other greasy spots and must be completely clean. Before the varnishing cycle, wait at least 28 days from the application of the finishing plaster. In case of chalked or particularly absorbent plasters we suggest to apply the insulating blend like ISOEDIL-A slightly diluted in a ratio of 1:5 with water or apply ISOLANTE ALTA PENETRAZIONE.nWe always suggest to use this treatment when the surface you want to paint presents tough absorbance diversities.nn nnApplicationnDilution in weight with water: the first until 40%, the second 20%. Apply the second layer after 4 hours minimum from the first. The application can be done with a brush, with a wool roll and by airless spray-painting.nn nnWarningsnApply the material only over seasoned and dried plasters.nAvoid the application during the coldest months of the year.nApply at a temperature higher than +5 ?C and lower than +35 ?C.n nnSupplyn14 and 5 liters cans.nColors: white available. Under request warm pastel colors (see the colors folder).n nnPreservationnAvoid the preservation in very cold places. Preserve at temperatures higher than +5 ?C and lower than +30 ?C. If stocked in proper places lasts 1 year.
PDF