PDFTechnical datanResult: variable according to the support kind, about 2-4 kg/m2nPhysical Status: powdernSpecific weight: 1.8 kg/lnDrying Time: variable according to the application environmentnGranulometry: from 0.3 to 3.0 mmnWater vapor Diffusion: 745 g/m2 in 24 hoursnResistance Factor to vapor diffusion: ? = 12nAir equivalent layer: Sd= ? ? s = 0.03 m (calculated with s= 0.2 ? 10-3 m)nCoefficient of water absorbtion: w= 0.25 kg (m2 ? h1/2). ? Sd ? w= 0.0075 kg (m ? h1/2).nRespects the theory by Kuenzle.
Intonaco Dilavato
Intonaco Dilavato
INTONACO DILAVATO is used on any surface whose base has been previously well prepared; it can be used indoor and outdoor.
Lectus hac tortor congue habitasse consectetur. Nibh id sapien libero mollis vehicula nostra accumsan potenti cras imperdiet.
UsenINTONACO DILAVATO is formed of selected marble powders, lime and additives that make it very workable, it has also got an excellent support grip. INTONACO DILAVATO was already used a few centuries ago in ancient palladian villas and today Colorificio Veneziano propose it again using modern production technologies that grant a great product stability. It is very breathable and alkali and mold resistant.nn nnBase preparation and application cyclesnAfter properly preparing the base (see technical data sheet Isolante Alta Penetrazione or Fondo Ruvido) apply one first layer of INTONACO DILAVATO with a steel trowel, let the surface dry well and after 16 hours apply another layer. Then compact the material to obtain a very smooth surface.nDuring the hottest months we suggest to wet the base with water.nIn order to protect the product and make it water resistant, after 10 days use a hydrosilonic product like Idrocem-A.nn nnWarningsnFor every work take the needed material all of the same kind.nApply the material only on seasoned and dry plasters.nAvoid the application on facades exposed to sun and wind.nAvoid the application during the coldest months, a +5 ?C temperature is the minimum value for the lay-up.nAvoid the application on a facade in different timesnINTONACO DILAVATO must be used at its original status without adding external materials.n nnSupplynPlastic vases: 18 kg.n nnPreservationnPreserve the product in right places. If stocked inside the original can it lasts 1year.nn nnQualitynINTONACO DILAVATO is constantly and properly checked. The raw materials used are strictly selected and checked.UsenINTONACO DILAVATO is formed of selected marble powders, lime and additives that make it very workable, it has also got an excellent support grip. INTONACO DILAVATO was already used a few centuries ago in ancient palladian villas and today Colorificio Veneziano propose it again using modern production technologies that grant a great product stability. It is very breathable and alkali and mold resistant.nn nnBase preparation and application cyclesnAfter properly preparing the base (see technical data sheet Isolante Alta Penetrazione or Fondo Ruvido) apply one first layer of INTONACO DILAVATO with a steel trowel, let the surface dry well and after 16 hours apply another layer. Then compact the material to obtain a very smooth surface.nDuring the hottest months we suggest to wet the base with water.nIn order to protect the product and make it water resistant, after 10 days use a hydrosilonic product like Idrocem-A.nn nnWarningsnFor every work take the needed material all of the same kind.nApply the material only on seasoned and dry plasters.nAvoid the application on facades exposed to sun and wind.nAvoid the application during the coldest months, a +5 ?C temperature is the minimum value for the lay-up.nAvoid the application on a facade in different timesnINTONACO DILAVATO must be used at its original status without adding external materials.n nnSupplynPlastic vases: 18 kg.n nnPreservationnPreserve the product in right places. If stocked inside the original can it lasts 1year.nn nnQualitynINTONACO DILAVATO is constantly and properly checked. The raw materials used are strictly selected and checked.
Prodotto Correlato
