Description
IDROCEM-S is a produst formed of silicon polymers, class polysiloxane, non-film-forming, resistant to alkali and atmospheric agents. According to its features, we suggest to use it for the hydrophobia protection of several kinds of mineral surfaces.nIDROCEM-S enters the support reducing much the absorption of surfaces? water, keeping transpirability and the original aspect of walls the same.nIDROCEM-S avoids both the continuous moldering of the construction material caused by the frost and defrost shift, and the presence of unaesthetic white spots caused by water-soluble salts which are extracted from walls.nIDROCEM-S is used on indoor and outdoor vertical surfaces, in any climatic condition and environment.nIt can be applied on mineral and stone absorbent supports, piling surfaces, cellular concrete, reinforced concrete, calcareous sandstones, plasters and bricks.nnDo not apply on old paintings or on organic coatings.nDo not apply on non-absorbent supports (shiny marble, granites and chalk)
InstructionsnBinder nature: alchil-polisilossan oligomernSolvent: hydrocarbons mixturenVolume mass UNI EN ISO 2811-1: 0.85 ? 0.05 kg/lnAspect: transparent liquidnDrying (22 ?C and 60% U.R.): total after 24 hoursn nnTechnical datanStone surfaces or brick walls: dust and clean the surfaces. If they are dirty or have flakes and crusts, we suggest to clean the support by high-pressure washing.nWhen the surface is dry apply IDROCEM-S.
Preparing the surfacenSupport temperature: Min +5 ?C / Max +35 ?CnHumidity: < 10%nAvoid to apply with surface condensationn nnApplication instructionsnTools: brush, air spray painting with a low pressure.nDilution: ready to usenFor air spray painting, use nozzles with a 1.2-1.4 mm diameter.nThe product performs its water resistant action after 1 day from the application.nProtects the treated surfaces against rain for at least 24 hours from the application.nClean the tools with turpentine or synthetic thinner.nResult: depending on the support absorption capacity. We suggest to make some preparatory trials.nSome consumptions indexes shown below:nnPiling 0.2-0.4 l/m2nNatural stones 0.2-1.2 l/m2nFrontal facade brick walls 0.5-1.0 l/m2nPlasters min 0.4-0.7 l/m2n nnTintsnThe product is only available colorless.nn nMaximum preservation temperature: +30 ?CnMinimum preservation temperature: +5 ?CnStored in the original closed package with right temperature: 18 monthsnn nnStoragenIt does not belong to D.Lgs 161/2006nnharmful ? dangerous for the environmentnflammablentoxic for water fauna, can cause negative effects for the sea environment at long termnharmful: can cause damages to lungs if ingerednthe exposition to vapors can cause dryness and skin chappingnthe inalation of vapors can cause sleepiness and vertigonpreserve out of the reach of childrenndo not breath vaporsndo not throw the material in the sewage systemnonly use it in a airy placenin case of ingestion do not throw up: get medical advice immediately and show the labeling boxnThe product must be transported, used and stored in accordance with the standards in force regarding hygiene and safety; dispose this product responsibly after use, let the residues dry out completely and treat them as special waste. Consult the safety sheet for additional information.Preparing the surfacenSupport temperature: Min +5 ?C / Max +35 ?CnHumidity: < 10%nAvoid to apply with surface condensationn nnApplication instructionsnTools: brush, air spray painting with a low pressure.nDilution: ready to usenFor air spray painting, use nozzles with a 1.2-1.4 mm diameter.nThe product performs its water resistant action after 1 day from the application.nProtects the treated surfaces against rain for at least 24 hours from the application.nClean the tools with turpentine or synthetic thinner.nResult: depending on the support absorption capacity. We suggest to make some preparatory trials.nSome consumptions indexes shown below:nnPiling 0.2-0.4 l/m2nNatural stones 0.2-1.2 l/m2nFrontal facade brick walls 0.5-1.0 l/m2nPlasters min 0.4-0.7 l/m2n nnTintsnThe product is only available colorless.nn nMaximum preservation temperature: +30 ?CnMinimum preservation temperature: +5 ?CnStored in the original closed package with right temperature: 18 monthsnn nnStoragenIt does not belong to D.Lgs 161/2006nnharmful ? dangerous for the environmentnflammablentoxic for water fauna, can cause negative effects for the sea environment at long termnharmful: can cause damages to lungs if ingerednthe exposition to vapors can cause dryness and skin chappingnthe inalation of vapors can cause sleepiness and vertigonpreserve out of the reach of childrenndo not breath vaporsndo not throw the material in the sewage systemnonly use it in a airy placenin case of ingestion do not throw up: get medical advice immediately and show the labeling boxnThe product must be transported, used and stored in accordance with the standards in force regarding hygiene and safety; dispose this product responsibly after use, let the residues dry out completely and treat them as special waste. Consult the safety sheet for additional information.
PDF
