Graffiato

UsenGRAFFIATO is used as protective and decorative coating for external and internal spaces over lime and cement bases.nn nnBase preparationnThe finishing coating must be applied after at least 28 days from the bottom plaster application.nThe surface needs to be completely clean. Grease, oil and wax spots must be removed.nChalked or absorbing bases must be treated with an insulating base, our Isoedil-A slightly diluted a ratio of 1:5 with water.nWe suggest to dilute Isoedil-A with Lavedil SQ when the surface to be coated presents absorbance diversities. (doors and windows frames, etc.) or if you want to extend the working time.nTo apply GRAFFIATO, the base plaster must be well finished.nIn case of applying the coating over surfaces that are very smooth, not spongy and scarcely absorbent we suggest to apply a layer of Fondo Ruvido slightly diluted in 50% weight with water, instead of using the base Isoedil-A.nn nnApplicationnLay the material on the surface with a metallic spatula paying attention to distributing one even layer of material. Use a plastic spatula to make the finishing with circular movements.nn nnWarningsnGRAFFIATO must be used at its original status without adding any other material.nnFor every work, collect the needed material all of the same kind.nApply only over seasoned and dry plasters.nAvoid the application on facades with full sun and too much wind.nAvoid the application during the coldest and most humid months of the year; +5 ?C is the lowest temperature for the laying-up and application of the material.nAfter applying, the surfaces must be protected by rain for at least 48 hours.nAvoid the application of the material over a facade in different times.n nnPreservationnAvoid the preservation in very cold places. Preserve at temperatures higher than +5 ?C and lower than +30 ?C. If stocked in proper places lasts 1 year.nn nnQualitynGraffiato is constantly and properly checked in our laboratories. The raw materials used are strictly selected and checked.UsenGRAFFIATO is used as protective and decorative coating for external and internal spaces over lime and cement bases.nn nnBase preparationnThe finishing coating must be applied after at least 28 days from the bottom plaster application.nThe surface needs to be completely clean. Grease, oil and wax spots must be removed.nChalked or absorbing bases must be treated with an insulating base, our Isoedil-A slightly diluted a ratio of 1:5 with water.nWe suggest to dilute Isoedil-A with Lavedil SQ when the surface to be coated presents absorbance diversities. (doors and windows frames, etc.) or if you want to extend the working time.nTo apply GRAFFIATO, the base plaster must be well finished.nIn case of applying the coating over surfaces that are very smooth, not spongy and scarcely absorbent we suggest to apply a layer of Fondo Ruvido slightly diluted in 50% weight with water, instead of using the base Isoedil-A.nn nnApplicationnLay the material on the surface with a metallic spatula paying attention to distributing one even layer of material. Use a plastic spatula to make the finishing with circular movements.nn nnWarningsnGRAFFIATO must be used at its original status without adding any other material.nnFor every work, collect the needed material all of the same kind.nApply only over seasoned and dry plasters.nAvoid the application on facades with full sun and too much wind.nAvoid the application during the coldest and most humid months of the year; +5 ?C is the lowest temperature for the laying-up and application of the material.nAfter applying, the surfaces must be protected by rain for at least 48 hours.nAvoid the application of the material over a facade in different times.n nnPreservationnAvoid the preservation in very cold places. Preserve at temperatures higher than +5 ?C and lower than +30 ?C. If stocked in proper places lasts 1 year.nn nnQualitynGraffiato is constantly and properly checked in our laboratories. The raw materials used are strictly selected and checked.