PDFTechnical datanSpecific weight: 1.580 ? 0.050nFlash point: unflammablenSolid in volume: 33%nAverage Viscosity: consistent and soft pastenDrying time: to the touch 1-2 hours, deeply 24 hoursnCovering time: minimum 24 hoursnFilm depth (micron): dry 150, humid 450nResult: 1 kg/m2nAspect of dry film: shinynMiling: 25 micronnWater vapor Diffusion: 340 g/m2 in 24 hoursnResistance Factor to vapor diffusion: ?=38.nAir equivalent layer: Sd = ? ? s = 0.09 m (calculated with s = 0.6 ? 10-3 m)nCoefficient of water absorbtion: w= 0.19 kg (m2 ? h1/2). ? Sd ? w = 0.0010 kg (m ? h1/2).nRespects the theory by Kuenzle.
Encausto
Encausto
ENCAUSTO is formed of acrylic copolymers, unalterable inorganic pigments and inert mineral charges. It is a stucco veneziano material, suitable for renovation but also for new buildings. The final result is a very elegant finishing. With ENCAUSTO the finishing are smooth and soft to the touch. This stucco is breathable and does not keep neither humidity nor the dust in teh air. ENCAUSTO is for indoor use only.
Lectus hac tortor congue habitasse consectetur. Nibh id sapien libero mollis vehicula nostra accumsan potenti cras imperdiet.
UsenENCAUSTO is a paste ready to use. Apply using a steel spatula or trowel, making semicircular movements. When Encausto starts drying, apply another layer in the spots that have been left unpainted during the first application. When it is almost dry, level the surface to make it smooth using a small amount of stucco. Before the complete drying up, polish the product using the same tool well cleaned making semicircular movements. You can also polish it using wax that makes the support even more resistant to dust and humidity.nn nnBase preparationnTo apply ENCAUSTO is necessary to have a very smooth base. If the wall is dysty, brush it and apply Isoedil-A or Fondo Ruvido.nFor irregular walls, first level the surface then if the depth is thick use T-POLVERE to insulate.nFor plasterboards use Fondo Ruvido.nn nnWarningsnAvoid the application on dirty and dusty surfaces. As first step clean the support with Fondo Ruvido.nAvoid the application on walls that have been previously treated with wax.n nnSupplynCan: 25 kg.nTints: Veneziano?s colors.n nnPreservationnPreserve the product in right places. If stocked inside the original can it lasts 1year.nn nnQualitynENCAUSTO is constantly and properly checked. The raw materials used are strictly selected and checked.UsenENCAUSTO is a paste ready to use. Apply using a steel spatula or trowel, making semicircular movements. When Encausto starts drying, apply another layer in the spots that have been left unpainted during the first application. When it is almost dry, level the surface to make it smooth using a small amount of stucco. Before the complete drying up, polish the product using the same tool well cleaned making semicircular movements. You can also polish it using wax that makes the support even more resistant to dust and humidity.nn nnBase preparationnTo apply ENCAUSTO is necessary to have a very smooth base. If the wall is dysty, brush it and apply Isoedil-A or Fondo Ruvido.nFor irregular walls, first level the surface then if the depth is thick use T-POLVERE to insulate.nFor plasterboards use Fondo Ruvido.nn nnWarningsnAvoid the application on dirty and dusty surfaces. As first step clean the support with Fondo Ruvido.nAvoid the application on walls that have been previously treated with wax.n nnSupplynCan: 25 kg.nTints: Veneziano?s colors.n nnPreservationnPreserve the product in right places. If stocked inside the original can it lasts 1year.nn nnQualitynENCAUSTO is constantly and properly checked. The raw materials used are strictly selected and checked.
Prodotto Correlato
