Idrocem-A Plus

Preparation of the supportnSurfaces such as stone material or bricks:nndust and clean the surfaces; in the presence of patina of dirt, superficial crusts, scales, etc? we recommend clean the substrate with hydro-cleaningnEnvironmental and support conditions:nnSupport temperature: Min. +5 ?C / Max. +35 ?CnMedia humidity: <10% ? avoid applications in the presence of surface condensationnIndications for the applicationnTools: brush, low pressure spraynDilution: the material is ready to usenIn spray applications use diameter nozzles 1.2-1.4 mmnThe product performs its water-repellent action after one day from application.nProtect treated surfaces from rain for at least 24 hours after application.nIndicative yield: variable according to the absorption of the substrate. Preliminary tests are recommended.nAfter impregnation wait until the water has evaporated.nPaintingnThe product is available colorless.nnMaximum storage temperature: +30 ?CnnMinimum storage temperature: +5 ?CnnStability in original unopened containers and in suitable temperature conditions: 18 months.nnStoragenIt does not fall within the scope of Legislative Decree 161/2006nnNot inflammable.nKeep out of reach of children.nDo not dispose of waste into drains.nIf swallowed, do not induce vomiting: seek medical advice immediately and show this container or the label.nThe product must be transported, used and stored according to the current health and safety regulations; after use, do not dispose of the containers in the environment, allow the residues to dry completely and treat them as special waste. For more information, consult the safety data sheet.Preparation of the supportnSurfaces such as stone material or bricks:nndust and clean the surfaces; in the presence of patina of dirt, superficial crusts, scales, etc? we recommend clean the substrate with hydro-cleaningnEnvironmental and support conditions:nnSupport temperature: Min. +5 ?C / Max. +35 ?CnMedia humidity: <10% ? avoid applications in the presence of surface condensationnIndications for the applicationnTools: brush, low pressure spraynDilution: the material is ready to usenIn spray applications use diameter nozzles 1.2-1.4 mmnThe product performs its water-repellent action after one day from application.nProtect treated surfaces from rain for at least 24 hours after application.nIndicative yield: variable according to the absorption of the substrate. Preliminary tests are recommended.nAfter impregnation wait until the water has evaporated.nPaintingnThe product is available colorless.nnMaximum storage temperature: +30 ?CnnMinimum storage temperature: +5 ?CnnStability in original unopened containers and in suitable temperature conditions: 18 months.nnStoragenIt does not fall within the scope of Legislative Decree 161/2006nnNot inflammable.nKeep out of reach of children.nDo not dispose of waste into drains.nIf swallowed, do not induce vomiting: seek medical advice immediately and show this container or the label.nThe product must be transported, used and stored according to the current health and safety regulations; after use, do not dispose of the containers in the environment, allow the residues to dry completely and treat them as special waste. For more information, consult the safety data sheet.