PDFFeaturesnSpecific weight: 1.850 kg/lnDilution: ready to usenAvailable in the following granulometries: 0.6; 1; 1.2; 1.5 and 2.0 mmnConsumptionnGranulometry: 0.6 mmnca. 2.5 ? 2.7 kg/m2 (2 layers) over thin plaster, glues like T POLVERE and T PASTAnca. 3.0 ? 3.2 kg/m2 (2 layers) over thick base plastersnGranulometry: 1.0 mmnca. 1.5 ? 1.7 kg/m2 over glues like T POLVERE and T PASTAnca. 1.8 ? 2.0 kg/m2 over base plastersnGranulometry: 1.2 mmnca. 2.0 ? 2.2 kg/m2 over glues like T POLVERE and T PASTAnca. 2.3 ? 2.5 kg/m2 over thick base plastersnGranulometry: 1.5 mmnca. 2.3 ? 2.5 kg/m2 over glues like T POLVERE and T PASTAnca. 2.5 ? 2.7 kg/m2 over thick base plastersnGranulometry: 2.0 mmnca. 2.8 ? 3.0 kg/m2nca. 3.0 ? 3.2 kg/m2n nnTechnical DatanSPEED TRANSMISSION OF STEAM EN ISO 7783-2nnCategory Spread equivalent to the thickness of the air layer Sd/mnV2 Medium Value between ?0,14 <1,4n WATER ABSORPTION EN 1062-3 nCategory Spread equivalent to the thickness of the air layer Sd/mnW3 Low Value ?0,1 kg/m?h?0,5n GRIP EN 1542 (test carried out in a time of 28 days mandatory technical) nAll measured values must be at least 0.3 MPa (mean value recorded 1.58 Mpa)n DURABILITY EN 13687-3nAll measured values must be at least 0.3 MPa (mean value recorded 2.34 Mpa)n nnN.B. Tests done by: Laboratory aut. by the Ministry of Infrastructure and Transport P.C.S. LL.PP.S.T.C. -law November 5 1971 n. 1086 Dec. N ? 56300 of 14/03/2007 Laboratory aut. by the Ministry of Infrastructure and Transport P.C.S. LL.PP.S.T.C. ? Presidential Decree No. 380/01 art. 59 circ. n ? 349/99 weeks. a), b) and c) Dec. n ? 53362 of 06/05/2005 Notified Body n ? 1308 (DM 826 149 of 22/03/2004 of the Ministry of Industry) under Dir. 89/106 / EEC, DPR No. 246/1993, DM 156/2003
Intonaco Acrilico
Intonaco Acrilico
INTONACO ACRILICO is a finishing coating formed of special acrylic binders highly water repellant, very fine colored quartz sands resistant to light and quemical additives to improve the manufacturing and adherence. The row materials used allow a good transpiration of the wall. The addition of anti-algue and anti-molds additives allow am excellent resistance to atmospheric agents and bacteria. The product with 2.0 mm granulometry is called GRAFFIATO and allows to obtain a finishing surface of rustic effect.
Lectus hac tortor congue habitasse consectetur. Nibh id sapien libero mollis vehicula nostra accumsan potenti cras imperdiet.
UsenINTONACO ACRILICO is used as protective and decorative coating for external and internal spaces over lime ? cement bases.nn nnBase preparationnThe finishing coating must be applied after at least 28 days from the bottom plaster application.nThe surface needs to be completely clean. Grease, oil and wax spots must be removed.nChalked or absorbing bases must be treated with an insulating base, our Isoedil-A slightly diluted a ratio of 1:5 with water.nWe suggest to dilute Isoedil-A with Lavedil SQ when the surface to be coated presents absorbance diversities. (doors and windows frames, etc.) or if you want to extend the working time.nTo apply INTONACO ACRILICO the base plaster must be well finished.nIn case of applying the coating over surfaces that are very smooth, not spongy and scarcely absorbant we suggest to apply a layer of Fondo Ruvido slightly diluted in 50% weight with water, instead of using the base Isoedil-A,nn nnApplicationnLay the material on the surface with a spatula paying attention at distributing one even layer of material. Use a plastic spatula to make the finishing with circular movements.nTo apply the product with 0.6 mm thin granulometry you need 2 layers of material. The second layer must be applied when the first one results to be completely dry.nn nnWarningsnINTONACO ACRILICO must be used at the original status without adding other materials.nnFor every work, collect the needed material all of the same kind.nApply only over seasoned and dry plasters.nAvoid the application on facades with full sun and too much wind.nAvoid the application during the coldest and most humid months of the year; +5 ?C is the lowest temperature for the laying-up and application of the material.nAfter applying, the surfaces must be protected from rain for at least 48 hours.nAvoid the application of the material over a facade in different times.n nnSupplyn25 Kg cans.nColors: see the colors palette.n nnPreservationnAvoid the preservation in very cold places. Preserve at temperatures higher than +5 ?C and lower than +30 ?C. If stocked in proper places lasts 1 year.nn nnQualitynINTONACO ACRILICO is constantly and properly checked in our laboratories. The raw materials used are strictly selected and checked.UsenINTONACO ACRILICO is used as protective and decorative coating for external and internal spaces over lime ? cement bases.nn nnBase preparationnThe finishing coating must be applied after at least 28 days from the bottom plaster application.nThe surface needs to be completely clean. Grease, oil and wax spots must be removed.nChalked or absorbing bases must be treated with an insulating base, our Isoedil-A slightly diluted a ratio of 1:5 with water.nWe suggest to dilute Isoedil-A with Lavedil SQ when the surface to be coated presents absorbance diversities. (doors and windows frames, etc.) or if you want to extend the working time.nTo apply INTONACO ACRILICO the base plaster must be well finished.nIn case of applying the coating over surfaces that are very smooth, not spongy and scarcely absorbant we suggest to apply a layer of Fondo Ruvido slightly diluted in 50% weight with water, instead of using the base Isoedil-A,nn nnApplicationnLay the material on the surface with a spatula paying attention at distributing one even layer of material. Use a plastic spatula to make the finishing with circular movements.nTo apply the product with 0.6 mm thin granulometry you need 2 layers of material. The second layer must be applied when the first one results to be completely dry.nn nnWarningsnINTONACO ACRILICO must be used at the original status without adding other materials.nnFor every work, collect the needed material all of the same kind.nApply only over seasoned and dry plasters.nAvoid the application on facades with full sun and too much wind.nAvoid the application during the coldest and most humid months of the year; +5 ?C is the lowest temperature for the laying-up and application of the material.nAfter applying, the surfaces must be protected from rain for at least 48 hours.nAvoid the application of the material over a facade in different times.n nnSupplyn25 Kg cans.nColors: see the colors palette.n nnPreservationnAvoid the preservation in very cold places. Preserve at temperatures higher than +5 ?C and lower than +30 ?C. If stocked in proper places lasts 1 year.nn nnQualitynINTONACO ACRILICO is constantly and properly checked in our laboratories. The raw materials used are strictly selected and checked.
