New Super

UsenNEW SUPER is used as dull painting for internal spaces and it can be used for any kind of support (walls, thin mortar, chalk, plasterboards).nn nnBase preparationnThe surface needs to be dry and clean, without dust, dirt, oil or any other greasy spots and must be completely clean. Before the varnishing cycle, wait at least 28 days from the application of the finishing plaster surface. In case of chalked or particularly absorbent plasters we suggest to apply the water acrylic insulating blend like ISOEDIL-A (or MURISOL K) diluted in a ratio of 1:5 with water or apply ISOLANTE ALTA PENETRAZIONE to be diluted 1:5.nWe always suggest to use this treatment also when the surface you want to paint presents tough absorbance diversities.nn nnApplicationnDilution in weight with water: the first layer until 35%, the second until 25%. Before diluting the product at rest, shake it softly. Apply two layers of product (the second layer after 4 hours from the first). The application can be done with a brush, a wool roll or with spray painting. For the spray painting we suggest to vary the dilution from 45% to 35%.nn nnWarningsnApply the product only over seasoned and dried plasters.nAvoid the application during the coldest months of the year.nAvoid the application with temperatures lower than +5 ?C or higher than +30 ?C and with a relative humidity higher than 75%.nNEW SUPER must be used at the original status without adding other materials, excepting water that needs to dilute the product.n nnSupplyn14 and 5 liters cans.nColors: see the colors palette.n nnPreservationnAvoid the preservation in very cold places. If stocked in proper places and inside the original box lasts 1 year.UsenNEW SUPER is used as dull painting for internal spaces and it can be used for any kind of support (walls, thin mortar, chalk, plasterboards).nn nnBase preparationnThe surface needs to be dry and clean, without dust, dirt, oil or any other greasy spots and must be completely clean. Before the varnishing cycle, wait at least 28 days from the application of the finishing plaster surface. In case of chalked or particularly absorbent plasters we suggest to apply the water acrylic insulating blend like ISOEDIL-A (or MURISOL K) diluted in a ratio of 1:5 with water or apply ISOLANTE ALTA PENETRAZIONE to be diluted 1:5.nWe always suggest to use this treatment also when the surface you want to paint presents tough absorbance diversities.nn nnApplicationnDilution in weight with water: the first layer until 35%, the second until 25%. Before diluting the product at rest, shake it softly. Apply two layers of product (the second layer after 4 hours from the first). The application can be done with a brush, a wool roll or with spray painting. For the spray painting we suggest to vary the dilution from 45% to 35%.nn nnWarningsnApply the product only over seasoned and dried plasters.nAvoid the application during the coldest months of the year.nAvoid the application with temperatures lower than +5 ?C or higher than +30 ?C and with a relative humidity higher than 75%.nNEW SUPER must be used at the original status without adding other materials, excepting water that needs to dilute the product.n nnSupplyn14 and 5 liters cans.nColors: see the colors palette.n nnPreservationnAvoid the preservation in very cold places. If stocked in proper places and inside the original box lasts 1 year.