PDFTechnical datanSpecific weight: 1.650 kg/l with +20 ?CnGranulometry: lower than 0.6-1.2 mmnConsumption: one layer 1.5?2.0 kg/m2; 2 layers 2.5?3.0 kg/m2nUse on any painted plaster, indoor and outdoor. Pay attention to thin mortar surfaces and make sure it has a good grip to the base.nnWater vapor Diffusion: 740 g/m2 in 24 hoursnResistance Factor to vapor diffusion: ? = 28nAir equivalent layer: Sd= ? ? s = 0.2 m (calculated with s= 1 ? 10-3 m)nCoefficient of water absorbtion: w = 0.25 kg (m2 ? h1/2). ? Sd ? w= 0.0070 kg (m ? h1/2).nRespects the theory by Kuenzle.
Intonaco
Intonaco
INTONACO DI CALCE is a mineral wall coating formed of grains and marble powders, seasoned slaked lime, dispersing agents that give the product excellent grip on any support. The product, thanks to its natural and mineral components, has a good breathability and alkali resistance, so it is the perfect product for renovating old facades. It is used for protecting indoor and outdoor facades. It is a thin mortar plaster and its features do not change in wet and dry conditions.
Lectus hac tortor congue habitasse consectetur. Nibh id sapien libero mollis vehicula nostra accumsan potenti cras imperdiet.
Base preparation and application cyclesnPreparing the supporti s essential as for all lime products. On two-coat-plasters apply one layer of Isoedil-A, on old plasters apply a colored Fondo ruvido in order to have a smooth absorption.nAfter that wait for at least 12 hours, then lay the material with a plastic or steel trowel.nINTONACO DI CALCE is available in 2 granulometry types, with the 1.2 one 1 layer is enough, with the 0.6 one, you need 2 thin layers of material. Apply with plastic, steel or rubber trowel according to the desired finishing. After the application protect the facade from rain for at least 4 days in order to avoid stains.nn nnWarningsnProtect INTONACO DI CALCE from freeze. A +5 ?C temperature and a relative humidity not higher than 30% during winter time is the minimum value for the application and the proper hardening of the product.nApply the material only on seasoned and dry plasters.nFacades coated with INTONACO DI CALCE, during the lay-up and the following days must be protected from rain otherwise white spots may show up.nAvoid the application on a facade in different times or with sun, shade, hit, freee, beacuse changeable drying conditions may cause bad color results on the finishing plaster.nDo not apply INTONACO DI CALCE with temperatures higher than +35 ?C.nAvoid the application during the coldest months.nDo not compact the material during the application otherwise ?vitrified? parts may limit the adherence during the following material applications.nVentilate the environment after the application until complete drying, avoiding sudden changes in temperature during the heating of the environment.nFor every work take the needed material all of the same kind.n nnSupplynCans: 25 kg.nTints: see colors foldern nnPreservationnPreserve the product in right places. If stocked inside the original can it lasts 1year.nn nnQualitynINTONACO DI CALCE is constantly and properly checked. The raw materials used are strictly selected and checked.Base preparation and application cyclesnPreparing the supporti s essential as for all lime products. On two-coat-plasters apply one layer of Isoedil-A, on old plasters apply a colored Fondo ruvido in order to have a smooth absorption.nAfter that wait for at least 12 hours, then lay the material with a plastic or steel trowel.nINTONACO DI CALCE is available in 2 granulometry types, with the 1.2 one 1 layer is enough, with the 0.6 one, you need 2 thin layers of material. Apply with plastic, steel or rubber trowel according to the desired finishing. After the application protect the facade from rain for at least 4 days in order to avoid stains.nn nnWarningsnProtect INTONACO DI CALCE from freeze. A +5 ?C temperature and a relative humidity not higher than 30% during winter time is the minimum value for the application and the proper hardening of the product.nApply the material only on seasoned and dry plasters.nFacades coated with INTONACO DI CALCE, during the lay-up and the following days must be protected from rain otherwise white spots may show up.nAvoid the application on a facade in different times or with sun, shade, hit, freee, beacuse changeable drying conditions may cause bad color results on the finishing plaster.nDo not apply INTONACO DI CALCE with temperatures higher than +35 ?C.nAvoid the application during the coldest months.nDo not compact the material during the application otherwise ?vitrified? parts may limit the adherence during the following material applications.nVentilate the environment after the application until complete drying, avoiding sudden changes in temperature during the heating of the environment.nFor every work take the needed material all of the same kind.n nnSupplynCans: 25 kg.nTints: see colors foldern nnPreservationnPreserve the product in right places. If stocked inside the original can it lasts 1year.nn nnQualitynINTONACO DI CALCE is constantly and properly checked. The raw materials used are strictly selected and checked.
Prodotto Correlato
